HE4K-DCK-10 Camera Connection Instructions
DOC-USR-0108-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
3
If you have received an HE4K-DCK-10 assembly, you will need to connect it to the Sony FCB-ER8300 4K
camera block. The Interface Front End PCB of the HE4K-DCK-10 assembly (see
) has a 30-pin KEL
connector that allows a flexible ribbon cable to be used to connect the encoder assembly to an identical
connector on the Sony FCB-ER8300.
The KEL cable is sold separately (ordering part number: CBL-0025-01).
WARNING: ONLY USE THE CORRECT KEL RIBBON CABLE PROVIDED BY Z3 TECHNOLOGY.
Using an incorrect cable can permanently damage the camera body.
Figure 1 HE4K-DCK-10 Physical Block Diagram (Camera Not Included)
Figure 2 HE4K-DCK-10 Connected to FCB-ER8300 (Camera Not Included)
Sony FCB ER-8300
(Not Included)
KEL Ribbon Cable
(Sold Separately)
