HE2K-DCK-1X User Instructions
DOC-USR-0122-05
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
11
5.0
GETTING STARTED WITH THE HE2K-DCK-1X
Note:
Some GUI images may reference the Z3Cam-4k, functionality and interface is otherwise the same.
5.1
Connecting the KEL Cable
If you have received an HE2K-DCK-1X assembly, you will need to connect it to the Sony FCB-EV7520
camera block. The Interface Front End PCB of the HE2K-DCK-1X assembly (see
) has a 30-pin
KEL connector that allows a flexible ribbon cable to be used to connect the encoder assembly to an
identical connector on the Sony FCB- EV7520.
(1)
Connect the KEL ribbon cable to the Sony FCB-EV7520 block camera. (Gold teeth face up)
(2)
Connect the other end of the KEL ribbon cable to the Interface Front PCB. (Gold teeth face away
from PCB’s)
WARNING: Only use a Z3 approved KEL ribbon cable to connect Z3’s boards to the Sony camera.
Using an incorrect cable (the cables provided by Sony) can permanently damage the boards or
camera.
The KEL cable is sold separately (ordering part number: CBL-0025-01).
Figure 4 HE2K-DCK-1X Physical Block Diagram (Camera Not Included)
Sony FCB-EV7520
