FV2K-DCK-1X User Instructions
DOC-USR-0121-09
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
13
5.0
GETTING STARTED WITH THE FV2K-DCK-1X
WARNING: Use ONLY FCB-EV7520 or compatible camera with the FV2K-DCK-1X. Using an incompatible
camera may
permanently damage
the camera and the FV2K-DCK-1X.
Figure 6 Camera Compatibility Warning
Figure 7 FV2K-DCK-1X Physical Block Diagram (Cameras Not Included)
(1)
Once received, the FV2K-DCK-1X assembly will need to be connected to the Sony FCB-EV7520 HD
camera block and the secondary camera with Composite Out. The Interface Front End PCB of the
FV2K-DCK-1X assembly (see Figure 8) has 2 30-pin KEL connectors that allow a flexible ribbon cable
to be used to connect the encoder assembly to an identical connector on the Sony FCB-EV7250,
however, ONLY the second
KEL connector, labeled “J
2
” is currently utilized. The
first KEL connector,
labeled “J
1
,” will be available with a subsequent software update. The Composite Out secondary
camera is connected to the FV2K-DCK-1X assembly via the MMCX Connector (see Figure 8). The KEL
Thermal Camera
Flex I/O or MMCX
BNC
