10
Z3 C onfidential
EIB-UAV-01 (DCK-15) UART’s
CONFIDENTIAL
DOC-USR-0220-01
EIB-UAV-01 (DCK-15) UART’s
CONFIDENTIAL
DOC-USR-0220-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
Number
Number
4
3
J1, J2, J3 DF13A-6P
JH064
HEADER
1.25mm
Hirose
DF13A-
6P-1.25H
Conn Header
1x6pins, 1.25mm,
R/A, SMT
5
1
J4
PJK-
JPDA69
JC005
2.5mm
stereo jack
Genesis
AJ2.5-
145
2.5 mm Phono
Jack, stereo,
thru hole
6
1
J5
JST-S4B-PH JH063
Header 4x1
2mm R/A
JST
S4B-PH-
KS
Header 2mm
male 4x1
Shrouded TH R/A
7
2
J22, J27
HDR8X2M-
1D27MM-SM
JH065
HEADER
8X2M
Amphenol
20021121
Header Male 2x8-
pin, 1.27mm,
VSM
8
1
J28
HDR8X1M-
1D27MM-SM
JH066
HEADER
8X1M
Harwin
M50-
3630842
Header Male 8-
pin 1.27mm Vert
SM
Table 2 Bill of Materials for EIB-UAV-01
Figure 4: EIB-UAV-01 J2 & J3 Pinout Connectors
3.2
Connecting the DRS Tamarisk Camera Digital Interface
The DRS Tamarisk camera requires a DRS Feature Board, which provides a compatible interface to the Z3
FlexIO header. The Tamarisk Feature Board is capable to provide digital video in LVDS Cameralink format as
well as analog composite video.
The FlexIO connector is used to connect directly to the DRS Tamarisk. It provides power and control to the
camera while allowing for video capture for digital formats.
The MCX connector on the Flir Camera interface board can be used for an Analog passthrough directly to a
monitor. If a streaming analog video output is desired the MCX connector can connect directly to the MMCX
on the encoder.
The only connection needed between the camera and encoder is a FlexIO cable, wired straight pin to pin
between the camera side and encoder side. Both sides use a JST shell part number SHDR-30V-S-B.
The following pins are required:
