8
Z3 C onfidential
EIB-UAV-01 (DCK-15) UART’s
CONFIDENTIAL
DOC-USR-0220-01
EIB-UAV-01 (DCK-15) UART’s
CONFIDENTIAL
DOC-USR-0220-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
The digital I/O pins on the Flex-IO connector are programmable by software and can be used to implement
interfaces for a large number of different standards. All FlexIO pins that connect directly to an FPGA are
named AUX_*. The remaining pins have fixed functions that cannot be reassigned by software.
Pins can be programmed to be single ended or differential, input or output, and can conform to different
I/O standards such as LVTTL with 1.8V, 2.5V or 3.3V levels.
This connector is designed to provide a direct interface to popular IR cameras from FLIR, such as the Boson
or Tau, or from DRS Technologies such as the Tamarisk. However, the Flex-IO connector can easily be
programmed to accept most other common digita l formats such as LVDS, BT1120 (FSDI-DCK-1x only), etc.
The header on the FV2K and FSDI board is from JST, part number BM30B-SRDS-G-TF. Pin 1 is marked on the
PCB silkscreen by a triangle.
Pin Signal
Pin Signal
1
Aux power, +12V
2
AUX_D7N
3
4
AUX_D7P
5
GND
6
N/C
7
GND
8
GND
9
AUX_D9P
10 AUX_D0N
11 AUX_D8N
12 AUX_D0P
13 AUX_D8P
14 AUX_D1N
15 GND
16 AUX_D1P
17 AUXD6N
18 AUX_D2N
19 AUX_D6P
20 AUX_D2P
21 AUX_D5N
22 AUX_CLKP
23 AUX_D5P
24 AUX_CLKN
25 AUX_D4N
26 AUX_D3N
27 AUX_D4P
28 AUX_D3P
29 GND
30 Composite Video In
Table 2: Flex-IO Connector Pinout
3.1.2
EIB-UAV-01 Connector Pin Outs
The following table is for pin connector J1:
Note
: The ethernet cable used with pin connectors J1, J2, and J3 is part number CBL-0048-01. This cable can be
purchased separately from Z3 Technology.
Pin
Signal
1
GND
2
RX minus (corresponds to RJ45 pin 6)
3
RX plus (corresponds to RJ45 pin 3)
4
TX minus (corresponds to RJ45 pin 2)
5
TX plus (corresponds to RJ45 pin 1)
