Z3 Technology DME-03, User Manual

Page: 29 / 51

CONFIDENTIAL DOC-USR-0061-01
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
29
(43) The options for CH2 appear. Here, you can specify HDMI or composite through the “HDMI” or
“Composite” options. Example values for encoding 720p through HDMI to a multicast address are
shown in
Figure 34
:
Note that it is not necessary to use a multicast address for HDMI / Composite. It is used here as an
example value. If SDI encode is also being done at the same time, the IP address / port set for
HDMI / Composite encode needs to be different from the IP address used for SDI encode.
(44) Click on “start.”
Figure 34 Configuring HDMI Input on CH2
(4) Change
to UDP
(5) Change to
multicast address
225.1.2.3
(6) Change Dest Port
to 8888
(1) Change to
“1280x720”
(2) Set Audio
Enable to
“True”
(3) Set Enable
of Sub Channel 1
to “yes”
(7) Click on “start”