Z1 Motorsports EcuTek Getting Started Download Page 5

Page: 5 / 7

P a g e

| 5

Revision B

6/30/2022

Reflash with Z1 tune:

1. Open the ECU Connect app. Ensure the EcuTek Bluetooth connector is plugged into your vehicle and the

ignition is in the

“ON” position.

2. Open the

My car

section of the ECU Connect app and then select the

Program ECU

option.

Select which ECU you want to program, in this case

Engine

. Then select which ROM file you

want to program.

Summary of Contents for EcuTek

Page 2: ...Quantity Description 1 1 Z1 by EcuTek Bluetooth Connector GETTING STARTED 1 Install the ECU Connect app on your iOS or Android device 2 Open the app On its first use you will need to select your tuner Type in Z1 in the search bar then select Z1 Motorsports ...

Page 3: ...your Z1 x EcuTek Bluetooth connector into your car s OBD2 port Turn the ignition key to the ON position but do not start the engine for push button cars press the start button without depressing the brake pedal 5 Select Continue and follow the prompts on your device to go through the Bluetooth pairing process and setup a PIN 6 The setup process is now complete ...

Page 5: ...he EcuTek Bluetooth connector is plugged into your vehicle and the ignition is in the ON position 2 Open the My car section of the ECU Connect app and then select the Program ECU option 3 Select which ECU you want to program in this case Engine Then select which ROM file you want to program ...

Page 6: ... 6 30 2022 AB 4 Select Program and then Start Test to begin the communication test This will take 5 minutes to complete then select Continue 5 Now it is time to flash the ECU select Program once again to begin the process ...