Z-World RCM3000, User Manual

Page: 55 / 86

User’s Manual 51
capability
is a bit-mapped integer indicating the capability information attained from
the probe response. It can have a combination of the following values ORed together.
0x0001 ESS (“Infrastructure Mode”)
0x0002 IBSS (“Ad-Hoc Mode”)
0x0004 CF-Pollable
0x0008 CF-Poll Request
0x0010 Encryption (WEP) Enabled
0x0020 Short Preamble
0x0040 PBCC
0x0080 Channel Agility
0xFF00 Reserved
Section 7.3.1.4 of the IEEE 802.11b specifications provides additional information about
these values.
ssid
is the service set identifier attained from the probe response. The format is the length
word, provided in the first two bytes, followed by the SSID string, which has a length of
0–32.
ratesAvail
specifies all the data rates that the BSS supports. For more information,
refer to Section 7.3.2.2 of the IEEE 802.11b specifications.
rate
is the data rate of the scan probe response received. It can have the following values.
0x0A = 1 Mbits/s
0x14 = 2 Mbits/s
0x37 = 5.5 Mbits/s
0x6E = 11 Mbits/s
WIFI_MAC
This option can be used to enable (“on”) or disable (“off”) the Wi-Fi CompactFlash card.
WIFI_SCANREQ
Requests a scan of access points to be conducted, or peers if in ad hoc mode. The result of
this scan can be read with the
WIFI_SCANRES
command.
WIFI_TX_RATE
This command macro specifies the maximum transmit rate for the Wi-Fi CompactFlash
card. This rate is reduced as necessary depending on the quality of the wireless connec-
tion. The options are:
1 Mbits/s (WIFICONF_RATE_1MBPS )
2 Mbits/s (
WIFICONF_RATE_2MBPS
)
5.5 Mbits/s ( WIFICONF_RATE_5_5MBPS )
11 Mbits/s ( WIFICONF_RATE_11MBPS )