Z-Wave ZWN3109 User Manual Download Page 2

ITEM

INFORMATION

Z-Wave Model

ZWN3109

Power Supply

AC 125V 60HZ

Signal(Frequency)

908.42/920MHz

Range

Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave™ receiver module.

Operating Temperature Range

5-104° F (-10-40° C)

Specifications

 

Specifications subject to change without notice due to continuing product improvemen

Introduction

 

This product can be operated in any Z-Wave® network with other Z-Wave Plus® certified devices from other manufacturers.  

All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. Each module is designed to act as a repeater,which will re-transmit a radio frequency 
(RF) signal by routing the signal around obstacles and radio dead spots to ensure that the signal is received at its intended destination.

ZW39SU  is a security enabled Z-Wave Plus® device. A security Enabled Z-Wave Plus® Controller must be used in order to fully utilize the product.

GENERIC_TYPE:  GENERIC_TYPE_SWITCH_MULTILEVEL(0x11)
SPECIFIC_TYPE:  SPECIFIC_TYPE_NOT_USED(0X00) 

Key Features

 

Remote ON/OFF control via the Z-Wave® controller

Manual ON/OFF control with the front panel push button

Support Association Group and Auto Report switch status

Support firmware upgrades via Over-the-air (need Gateways support)

Support SmartStart

Support Long Range

ZWN3109 User Manual

No. 2 / 7

Summary of Contents for ZWN3109








Reviews: