15
Configuration
The Configuration Tab allows configuring the functions of the device. Pick the device to be configured from
the drop down list to access four tabs.
Interview
The device interview section shows the result of the device interview. In this process the
controller tries to get information about the device. In case the controller find a device
description record for the device it will display further information about the device that can
not be obtained from the device itself. If the software will not automatically recognize the
device and load the description record a button “Choose Device Description Record” allows
to do this manually.
The interview stage line gives information about the progress of the device interview by
splitting it into the different command classes supported by the device. ‘+’ indicate a
successful interview, ‘0’ a permanent fail and a ‘.’ that this command class is still in the waiting
queue to be completed.
There are a few reasons why an interview is not complete: In most cases the devices went to
deep sleep too early to has some problems. The button “Force Interview” allows re-doing
the whole interview. The button “Request NIF” requests a Node Information Frame from
Summary of Contents for Z-Box
Page 23: ...23...
