4
WIRELESS RANGE
This device complies with the Z-Wave standard of open-air, line of sight
transmission distances of 100 feet. Actual performance in a home depends
on the numbers of walls between the remote controller and the destination
device, the type of construction and the number of Z-Wave enabled devices
installed in the control network.
Z-Wave Interoperability
This product can be included and operated in any Z-Wave network with other Z-Wave
certified devices from other manufacturers and/or other applications. All non-battery
operated nodes within the network will act as repeaters regardless of vendor to increase
reliability of the network.
Z-Wave Specification
SDK version
6.61.00 (Z-Wave Plus)
Country
KR
Z-Wave hardware platform
ZM5101
Library
slave_enhanced_232
Roll Type
ROLE_TYPE_SLAVE_ALWAYS_ON
Basic Device Class
BASIC_TYPE_ROUTING_SLAVE
Generic Device Class
GENERIC_TYPE_SWITCH_BINARY
Specification Device Class
SPECIFIC_TYPE_POWER_SWITCH_BINARY
No
Command Class
Command
Value
Operation
1
COMMAND_CLASS_BASIC_V2
BASIC_GET
BASIC_REPORT
relay status
BASIC_SET
0x00
relay ON
0xFF
relay OFF
2
COMMAND_CLASS_SWITCH_BIN
ARY_V2
SWITCH_BINARY_GET
SWITCH_BINARY_RE
PORT
relay status
SWITCH_BINARY_SET
0x00
relay OFF
0xFF
relay ON
3
COMMAND_CLASS_SWITCH_AL
L_V1
SWITCH_ALL_GET
SWITCH_ALL_REPOR
T
SWITCH_ALL_SET
0~2, 0xFF
both or only or none
ON/OFF
SWITCH_ALL_ON
-
conditional ON
SWITCH_ALL_OFF
-
conditional OFF
4
COMMAND_CLASS_METER_V2
METER_GET
METER_REPORT
value of
Meter(0x00) or
Watt(0x02)
METER_RESET
-
initialize Meter
※
Delta Time : not supported. Only current Watt and Meter is
supported.
5
COMMAND_CLASS_SENSOR_M
ULTILEVEL_V4
SENSOR_MULTILEVEL_G
ET
SENSOR_MULTILEVE
L_REPORT
value of Watt
