Z-TRAUQ INC. P9650, Manual, Page: 3 / 3

Max. DC Load Breaking Capacity Electrical Endurance
CONNECTION DIAGRAM
L1
L2
L3
N
DIMENSIONS
96
96 10
89.5
96
12
80
Front view Side view
All dimensions are in mm.
t t
(s)(s)
10
1
0.1
k
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.05
1 10 20
I/I>
www.z-trauq.com 877-798-7287 sales@z-trauq.com
A1 A2
Aux.supply
1 2 3 4 5 6
7
8
Rly 1
L1 L3 L2
X1
X1 X1
X2
X2 X2
9 10 11 12 13 14 15 16
95
TECHNICAL SPECIFICATIONS
Supply voltage Un (1, 2): ±15%
230VAC ±15%
(V o lta g e s h ou ld be specified at time of ordering)
Rated frequency: 50/60Hz
Isolation: Over voltage cat. III
Rated impulse
withstand voltage: 4kV (1.2 / 50 µS) IEC 60664
Power consumption: 3W max.
Rated current input In: 5A (directly connected)
Rated frequency: 50Hz
Burden: <0.4VA @ In
Overload: 4 x In (continuous)
External CT terminals
9, 10, 11, 12, 13, 14 Class C recommended with 5A secondary
Overcurrent settings:
Low-set trip (I>): 2.0 – 6.0A (40 – 120%)
Time multiplier (TM):
0.05 – 1.0
High-set trip (I>>): x1 – x10 or disable
High-set definite time:
Instantaneous (<50mS)
Pick up value: +2% of trip setting
Accuracy:
Protection thresholds:
± 5%
Response time: ± 5% (with a minimum of 50mS)
Repeat accuracy: ± 0.5% @ constant conditions
Ambient temperature: -10 to +60°C
Relative humidity: +95% (non-condensing)
Output:
RL1 (3, 4, 5): 1 x SPDT relay
Output rating: AC1 250V 8A (2000VA)
AC15 250V 5A (1250VA)
DC1 25V 8A (200W)
Electrical life:
≥ 150,000 ops at rated load
Dielectric voltage: 2kV AC (rms) IEC 60947-1
Rated impulse
withstand voltage:
4kV (1.2 / 50µS) IEC 60664
115VAC
Options:
The P9600 range also includes individual Overcurre nt or Earth fault relays
available with either IDT or IDMT tripping characte ristics.
Please refer to separate data sheets.
Tripping Curve Characteristics (Normal Inverse 3/10).
Housing: Flame retardant Lexan
Protection: IP55 / IP20 (rear)
Weight: ≈ 590g
Mounting: Panel mounting. Cutout = 91 x 91mm (± 0.5mm)
Max. panel thickness:
Terminal conductor size: 0.05 - 2.5mm
2
(30 - 12AWG)
Recommended tightening
torque: 10in lb (1Nm)
Wire stripping length: 0.24 – 0.30in (6 – 7.5mm )
Approvals: Conforms to IEC. CE and
and RoHS Compliant.
EMC: Immunity: EN/IEC 61000-6-2
Emissions: EN/IEC 61000-6-4
Generic: IEC 60255-26 (EMC), IEC 255-3, IEC
60255-151
12mm