Doc# 27-0010UM Issued 02/01 Rev 1.0
22
Troubleshooting
SAW TOUCH PANEL
If the cursor does not move under the
pointer when touched, calibration of
the touch panel may be required.
Note: whenever the monitor is
connected to a new or different host
computer, calibration of the touch
panel should be performed. Calibra-
tion is performed as follows:
1. From the Control Panel Directory,
select the ELO Touch Screen
Program on the host computer.
2. Select the General tab
3. Press the Align button at bottom
of menu.
4. Follow on-screen instructions
CURSOR NOT RESPONDING
