Z-Line Designs Merako ZL7227-58M29U, Manual

Page: 23 / 40

1. Measure the distance from 2" to 3" ABOVE the BOTTOM of your Plasma/Flat Panel TV to the desired location
(Outlet or Media Stand) and mark that length on the Cable Cover, using a straight edge.
2. Now carefully cut the (20) Cable Cover Back Plate and (21) Cable Cover Front Plate with a Fine Tooth Saw.
3. Using the (20) Cable Cover Back Plate as a template, align the Back Plate on the wall to the desired location
and mark the TOP, MIDDLE, and BOTTOM set of holes using a pencil.
*NOTE: Position the (20) Cable Cover Back Plate so that it is roughly equal distance in between the
(17) Upper Mounting Panel and the assembled TV Stand unit.