11
4.Locate the RTD Male Plug-In-Connector coming from the Grill Chamber Assembly. It will
look like a loose wire with a connector on the end. Locate Connect the RTD Female
Plug-In-Connector coming from the Hopper Assembly. Connect the two RTD
Plug-In-Connectors together. Pull the RTD wire down so that it is sandwiched between the
hopper and the chamber. The extra RTD wire will be at the bottom of hopper.
4.ATTACHING THE SMOKESTACK AND CHIMNEY CAP
Insert two Bolts (G) through Gasket (O), the two holes in the Smoke Stack Assembly (27)
and the two holes in the Smoke Stack Gasket (26). Align and insert through the two holes in
the Grill Chamber Assembly (1). Attach using Nut (K). Tighten with Wrench(N). Then tighten
the Chimney Cap Assembly (28) on the Chimney Fixing Hole.
