7
5.Remove the two Protection Bar under the Grill Chamber (1) with screwdriver.
6.Remove Bolts (A) from the Grill Chamber (1). Lift up the Grill Chamber (1) on the Body
Frame. Make sure that the Grill Chamber (1) is between the left and right plate of the Frame.
Align the Chamber holes with the plate holes and secure with Bolt (A).
2.ASSEMBLING OF HOPPER
1.Insert Hopper Top Assembly (40) into Hopper Bottom Assembly (42), align the holes.
Make sure hopper opens to the front (control side). Insert the Bolts (E) through the holes in
the Hopper and Kep Nuts (F), then open the Hopper Lid and tighten it from inside. The four
sides are installed in the same way.
2.Insert Bolt (A) through the Hopper Handle (41) and into the Hopper.
