The file name shall be mercury.cfg.
Restore Factory Default Settings
The ZMAX-8210 provides two ways to restore the default factory settings.
Restore the factory default settings via web:
From the “Restore Factory Default Settings”, clicking
“
Restore
”
will restore your
ZMAX-8210 default settings.
Restore the factory default settings via “Restore Button”.
When the ZMAX-8210 power adapter is connected to this device, press
“
Default Button
”
for
about over10seconds. The
“
Default Button
”
is shown as below:
Hardware
Default Button
Figure 24 ZMAX-8210 Default Button
Reboot
The ZMAX-8210 supports PoE supply. You can restore web-based management to reboot this CPE.
Enabling “Yes” can reboot it.
Figure 25 Reboot
SSH
The ZMAX-8210 provides SSH management. It is recommended that Putty is your right option to
access this device’s management.
Open
by double clicking Putty
Enter 192.168.1.1 in the “Host Name” field and “Protocol”.
Chapter 5 Management - 24 -
