YZ Systems DynaPak DP-2010RN, Instructions & Operating Manual

Page: 12 / 61

YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
Page 8
DP-2010RN ver.05012003 Rev-1
SSSSS
ECTION ECTION
ECTION ECTION
ECTION
2: 2:
2: 2: 2: S
S
S S S
Y YY
Y
YSTEM STEM
STEM STEM
STEM
I I I
I I
NST NST
NST NST
NSTALLA ALLA
ALLA ALLA
ALLATION TION
TION TION
TION
Standard System Connections
DynaPak-2010RN With Slipstream Kit
a. Mount the DP-2010RN with slipstream
kit on a vertical 2" pole.
b. Connect the slipstream adapter to the
pipeline product supply and product
return connections as shown in the
diagram.
c. Connect the sample out connection to
the sample vessel.
d. Before applying pipeline pressure to the
DP-2010RN), ensure that the product
supply valve is closed.**
e. After pipeline pressure has been applied
to the sampler, check the slipstream tubing
connections for leaks.
f. Open the product supply valve.
g. Follow the "Operational Check and Leak
Testing Procedures" detailed in Section 9.
**CAUTION
Incorrect operation of valves (over tightening) can result in damage to the valve components
(isolation valve bonnet assembly) which might result in the valve stem being screwed out of the
probe body. This of course results in product at pipeline pressure being vented continually
through this port until this section of the pipeline is shut in. Be aware of the following proce-
dures and information.
· DynaPak valves are of soft seat design and
should only be closed or opened with fingers.
No wrenches should ever be used.
· If a valve will not seal off with finger tight
operation the valve should have maintenance
performed to allow proper operation of the valve.
DP-2010 Slipstream Adapter Kit
*Denotes Items Included in
10 1/4"
Product Supply
Relief Valve
Loop
1000
500
2000
psi
1500
PreCharge
300 250 275 225
80%
175 200 150
BOX 890 SN YDER, TEXAS 79550
Y-Z INDUSTRIES, INC.
*Vessel Tray
(By Customer)
2" Pipestand
Factory
Mutual
System
App roved
*Slipstream Adpater
w/Self-Cleaning Screen
Product Loop Return
FLOW
100 125 75 25 50 0
Product 1000
500
2000
psi
1500
Sample Vessel
(Optional)
YZ Durasite
Solar Panel Option
21 1/8"
ps
i
Sampled
Product
(Optional)
SPO-12
figure 5
DynaPak 2000N Pump
* Denotes Optional or Customer Supplied Items
*
*
*
*
*
*
*Link Plus
System Enclosure
Low Power
Solenoid
Z-65 Controller
Filter Regulator