YWH100 IP Phone User manual V1.38
Page 33 of 32
3,Configured by PalmTool
PalmTool is a tool designed especially to configure and upgrade the YWH100 IP
phone. You can visit http://www.yntx.com to download the latest version of
PalmTool. Then please unzipthe downloaded file and save them.
a) On a PC connecting with the phone or at the same segment of the phone,
double click
icon to open the PalmTool. The index page of PalmTool popup.
b) Input the IP address of the phone into Local IP field (such as 192.168.1.100), and
then click “Phone Settings” button.
From Version1.24, use PalmTool to set the IP phone, please set debug as output or
output all firstly, or PalmTool cannot connect IP phone. The parameters of PalmTool is
same as the parameters in HTTP, so please refer to HTTP set chapter to learn how to set
IP phone.
Usage of the phone
1, Receiving calls
YWH100A/B/C/D IP phone can receive incoming calls from other
YWH100A/B/C/D IP phone and devices that support the H.323 protocol. It works just
like an ordinary phone for incoming calls. When it rings, you can receive the call by
following methods:
(1) Use handset
Lift the handset and begin speaking. When the call is over, put the handset back.
(2) Handset to hand free
While receiving call with handset, press
【
Hand free
】
on the keypad and then put
down the handset. When the call is over, press
【
Hand free
】
again.
(3) Use Hand free
Press
【
Hand free
】
to speak to the other party. When the call is over, press
【
Hand free
】
again.
(4) Hand free to handset
While receiving the call with the
【
Hand free
】
pressed, pick up the handset to
