Battery installation
Unit setting
Open the battery cover and install four AA bat
-
teries properly. Then close the cover with a click
sound.
Unit setting
Press the " " button and the " " button at the
same time for more than 3 seconds till the
mmHg/kPa starts flashing. Press the "
" button
to choose unit between mmHg and kPa. Press " "
to finish setting.
After finishing unit setting, press the "
" button to
shut down.
The"
" icon appearing means the battery is
low.
The"
" icon appearing means the battery is
running out. Please replace all the batteries.
Please take out the batteries if the monitor will not
be used for a long time (over three months).
Note: 6V/600mA DC external power can be
connected to the monitor. (Please use the
power adapter supplied by us.)
Please take out the batteries if use the
DC external power for a long time.
Open the battery
cover
Install the
batteries properly
Close the battery
cover
14
15