15
16
Start measuring
Start measuring
1. Do not move and keep quiet until measurement finished.
2. Keep the monitor and heart at the same level.
3. Restart if the cuff got loose while measurement.
4. Press the " " button to stop measurement. If it does not work,
please take off the cuff.
Warning: Upper limit pressure of air inflation is 300mmHg/40.0kPa.
Don't keep the inflated state for a long time to avoid damage.
5. The time interval between two measurements should be at least 2~3
minutes or longer.
SYS
mmHg
mmHg
DIA
P
/min
m
Sit still for 5 minutes before the measurement
Full screen display state
1. Measurement
All icons on screen appear for 1 sec after pressing the
" " button, then
disappear. After that the deflation " " icon flickers which means the
system is in zero testing. Several seconds later the inflation icon" "flashes
which means the zero testing is finished. Then inflation starts.
The zeroing state
The inflation state
Cuff detection icon
Increase with the pressure
The monitor starts measuring automatically after pressing " " button,
and the icon" " starts to flicker, Pressure rises
gradually.