Owner’s Manual
TX106 Aluminum XL Folding Arch Ramp
Page 2
Check for parts online at
www.yutrax.com
or call 800-345-6007 M-F 8-5 CST
WARNING
READ, UNDERSTAND AND FOLLOW ALL ASSEMBLY,
INSPECTION, & USE INSTRUCTIONS PROVIDED
BEFORE EACH USE. FAILURE TO FOLLOW ALL
INSTRUCTIONS, WARNINGS & LOAD CAPACITY RATING
COULD RESULT IN SERIOUS INJURY OR DEATH.
IF ANY INSTRUCTIONS ARE NOT UNDERSTOOD OR IF
YOU HAVE A PARTS ISSUE CALL 800-345-6007 BEFORE
USING.
DO NOT USE AN ATV ON THIS RAMP IF THE ATV
HAS SNOW CHAINS ON TIRES. CHAINS WILL CAUSE
DAMAGE TO YOUR RAMP AND IS HAZARDOUS!
BE CAREFUL OF PINCH POINTS AT RAMP HINGE
LOCATIONS.
BE CAREFUL OF PINCH POINTS AT RAMP TAB
LOCATIONS WHILE SECURING RAMP TO TAILGATE.
SAFETY STRAP MUST BE SECURELY HOOKED UP TO
VEHICLE TO PREVENT RAMP FROM SLIDING OFF
TAILGATE. TEST BEFORE USING OR YOU COULD BE
SERIOUSLY INJURED. BE SURE YOUR TRUCK IS IN
PARK AND EMERGENCY BRAKE ENGAGED.
BE SURE VEHICLE IS CENTERED ON RAMPS. DO NOT
USE WITH ANY VEHICLE THAT HAS WIDER TIRES THAN
THE RAMP WIDTH.
MAXIMUM USABLE HEIGHT, GROUND TO LOADING
POSITION, IS NO MORE THAN ONE HALF THE LENGTH
OF THE RAMP.
BE SURE RAMP IS PROPERLY PLACED AND SECURED
AS DESCRIBED IN LOADING INSTRUCTIONS.
DO NOT USE ON SOFT SURFACES OR UNLEVEL
TERRAIN.
REAR ENGINE EQUIPMENT SHOULD BE LOADED IN
REVERSE TO AVOID FRONT END REAR-UP.
DO NOT EXCEED THE CAPACITY OF YOUR LOADING
SURFACE (I.E. TAILGATE, BUMPER). IF UNKNOWN,
CONSULT THE MANUFACTURER TO FIND LOAD
CAPACITIES.
IF LOADING OR UNLOADING FROM A TRAILER, MAKE
SURE THE TRAILER IS PROPERLY COUPLED TO THE
TOW VEHICLE.
NEVER STAND IN THE PATH OF EQUIPMENT WHEN
LOADING/UNLOADING WITH THE RAMP, AND KEEP
BYSTANDERS AWAY FROM THE RAMPS.
DO NOT STEP BETWEEN RUNGS. THIS MAY CAUSE A
PERSON TO FALL THROUGH AND POSSIBLY RESULT IN
SERIOUS BODILY INJURY.
RAMPS ARE INTENDED FOR LOADING/UNLOADING
EQUIPMENT ONTO A TRAILER OR PICKUP TRUCK. DO
NOT USE RAMP SECTIONS AS A LADDER, BRIDGE,
SCAFFOLDING, OR FOR ANY OTHER PURPOSE.
S
Summary of Contents for TX106
Page 1: ......
