YUSHI INSTRUMENTS
9
this function, you should use Gate A to catch the echoes. Otherwise, it will result in error in reading.
SL
In the windows, the dB difference of the quantitative line relative to DAC curve will be
shown. If there is no DAC curve, then it displays SL ----.
Hint: on the parameter menu, the 8 submenus are shown on two screens - the former five ones on
one screen, and the latter three ones on the other screen. You can switch among them by pressing
.
3.2 Setting Menu
Press
to select the setting menu.
3.2.1 Waveform Filling
This function enables you to adjust the waveform displaying mode.
Select the setting menu, press
(up) or
(down) to select the waveform filling submenu,
then press
(left) or
(right) to select off or on. Off refers to enveloping, and On refers to
filling.
3.2.2 Color Scheme
You can use the function to adjust the colors on the screen.
Select the setting menu, then press
(up) or
(down) to select the color scheme
submenu. Then press
(left) or
(right) to choose one of seven color schemes.
3.2.3 Language
You can use this function to choose a language.
Select the setting menu, the press
(up) or
(down) to select the language submenu. Then
press
(left) or
(right) to choose Chinese or English.
3.2.4 Alarming
You can use this function to set whether there is an alarm.
On the setting menu, press
to activate the function. Press
(up) or
(down) to
select the alarming submenu. Then press
(left) or
(right) to set the alarm. Off refers to
turning off the alarm, while on refers to turning on the alarm.
3.2.5 Automatic Wave Height
You can use this function to set the percentage of the height of the automatic gain waveform on the