Directions for use
1. Connect the wireless charger with the power source.
2. Put the mobile phone on the magnetic shielding patch to charge. When the charger is
working, the indicator light lights up.
Note: Only can be used by the device that conforms to the QI standard.
Attentions
1. Do not press and shock heavily on product.
2. Do not split or remould the product by yourself.
3. Do not put the product near to fire or put it into wate
r.
4. Do not use the wireless charger under severe conditions, such as high temperature,
humidity & corrosivity, in case causing electric leakage.
5. Do not put the product near to magcard (credit card, bank card etc), in case causing
the magnetism invalid.
6. Do not put metal or phone case with metal on the charger.
7. Keep the product away from water or other liquids.
8. If you need to clean the product, be sure the power is cut off.
9. Do not give it to children as kids’ toys.
Note: this equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 and part 18 of the FCC Rules. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
●
Increase the separation between the equipment and any other radio device.
●
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 and part 18 of the FCC Rules. Operation is
Subject To the following two conditions: (1)This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or modifications
not explicitly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
Caution: Any changes or modifications not expressly approved could void the user’s
authority to operate the equipment.
