ST10+ AND RECEIVER BINDING
Step 1)
Turn on TYPHOON, and
after the Main LED Status Indicator
begins to flash blue rapidly, lift the
back end upward approximately 45°
then back down to ‘level’ two (2)
times to put the aircraft/receiver into
bind mode. The Main LED Status
Indicator will begin to the flash
orange very rapidly when the
aircraft/receiver are in bind mode.
2 x 45+°
Step 2)
Turn on the ST10+,
and if required tap the
screen (outside of the pop
up status window) to
bypass the RC and WiFi
connection process.
Step 3)
Tap the ‘Model
Select’ button, and if
required press ‘OK’ to
bypass any pop up
warnings/alerts.
Step 4)
Select the existing
model
(for
example:
‘TYPHOON’) you would
like to bind to (or create a
‘New Model’), and if
required press ‘OK’ to
bypass any pop up
warnings/alerts.
Step 5)
Tap the ‘Flight
Settings’ button, and if
required press ‘OK’ to
bypass
any
pop
up
warnings/alerts.
Step 6)
Tap the ‘Bind’
button and select the
‘SR24_XXXXX’
receiver
listed in the column under
‘Model’, then tap ‘OK’ after
the connection has been
established.
Step 7)
Tap the ‘Back’
button two (2) times to
return to the main screen
and the model/receiver
should
automatically
connect to the ST10+.
5
SR24_16042
