Step 9:
Tap Finish to complete the binding process.
CALIBRATING THE COMPASS
In the following situations recalibrating the Compass is suggested for flight safety:
1. Before the first flight when you take the drone out of the box;
2. After a long distance trip;
3. Every time the payload has been replaced;
4. The drone alarms a compass warning.
Calibrating
In the Settings Menu, tap Sensors | Compass. Follow the onscreen display and instructions.
During Compass calibration, the H520E/H520E
-
RTK will need to rotate along the specific axis
which shown by the LED under the Motor Arm until a tone is heard and the display turns green.
Repeat this procedure for all six positions. If Compass calibration fails, ensure there are no
electronic devices or metal objects within ten feet of the H520E/H520E
-
RTK. A yellow box with a
red arrow indicates the current calibration. A green box indicates a completed position.
Notice
: If all six led lights flash Red rapidly, the Compass calibration has failed. Restart the
procedure. If the issue persists, move the H520E/H520E
-
RTK to a different location. Or contact
Yuneec customer service via
Notice:
After Compass calibration was finished, Please reboot the drone.
