Step 4.
Using the password “1234567890”, authorize the
camera and tap “OK” to confirm.
NOTICE
If the connection process is delayed, close the pop
up window and then repeat the above steps.
NOTICE
1 Ensure that the firmware of the gimbal has been updated to the latest version.
2 For the latest product information, please check our official website
：
www.yuneec.com
WARNING
Do not try to repair the E10T gimbal camera.
Do not expose the lens of E10T gimbal camera to extreme light sources.
Do not operate the E10T gimbal camera in the rain or in environments with high humidity.
Do not touch or move the E10T gimbal camera until the initialization process has been completed.
The following special language terms are used throughout the product literature to indicate
various levels
of potential harm when operating this product:
