TRANSFERRING FILES
Follow the steps to transfer video and photo files to a
computer:
CGO2-GB does not
respond to control
inputs and LEDs
flashes in RED.
CGO2-GB may not have
positive connection
via yaw axle cable.
Check CGO2-GB yaw axle
control cable, if necessary
try reconnecting and
cycling the power on/off.
The gyro board
harness may have
disconnected from
the GB2 GB control
board.
Check the connection
between the gyro
board and the GB2 GB
control board.
CGO2-GB can not
be powered on.
CGO2-GB control
harness may not be
connected into the
correct port.
If using GB2 GB with
QX1, be sure to connect
the power cable from
QX1 to the slot on
CGO2-GB.
The CGO2-GB does
not function or
respond.
CGO2-GB may have
been moved during
initialization.
Cycle the QX1
power on/off by
switching on/off.
CGO2-GB failed in
turning back to the
front
10
11
Summary of Contents for CGO2-GB
Page 1: ......
Page 19: ...Copyright 2014 Yuneec ...
