Shenzhen Yunmi Intelligent Technology Co., Ltd
8
2. Charger
Intelligent charger owns over-charge protection function. While battery is charged to 100%, it will stop charging
automatically(Suggest to pull out the plug immediately after full charge. )
3.
Battery
Lithium battery equipped in scooter do not need any maintenance, but please pay attention to the following events
and limits of lithium battery same as other type of battery.
1. Do not ride in the rain.
2. Do not expose in the sunshine with high temperature.
3. Charge scooter full after receiving it.
4. Charge after riding.
5. Do not let scooter run out of power completely.
6. The riding time and range is shorten obviously after one charge, please replace the battery.
7. Check the battery every three months if you do not ride, and charge the battery on request.
8. The battery will be affected by temperature. The best temperature is 25
℃
.
Attention: Do not put scooter there without any charge more than 90 days. Or keep the battery power off over 10
days. In these case, the battery may get damaged.
4.
Brakes
When braking performance begins to deteriorate, check whether there is brake oil in the tubing or not. If there is no
brake oil, add it to get brakes to the required sensitivity. If brake oil is added, but brake performance is still not good,
and the brake sounds noise. The brake pads needs to be replaced.
5.
Folding Parts
When you feel the grip loosen, adjust the screw between the grip and the T-tube with a hex wrench. When the body
tube starts to loosen, tighten the screw underneath folding part connecting the bar tube and scooter body.
6. Lubrication
Add a little lubricant into the clutch sleeve of the folding handle every six months as maintenance.
Attention: Do not use wd40 to lubricate spare parts, also not lubricate front and rear wheel. If there is any questions,
please contact us.
7. Tire
When the tires get obvious wear or tear, please replace.
8.Cleaning
1. Use suitable cleaning agents as well as protective agents and soft cotton
2. Do not use solvents.
3. It is forbidden to spray the water column directly to scooter.
4. Rinse with clean water after cleaning to ensure no detergent residues
。
5. Wipe with a dry cloth
6.
Clean the brake parts very carefully in a safe place. Water vapour on brake components may cause brake
malfunction
。
7. Refuel protection oil on elastic parts.
General Questions
Scooter cannot be power on
