Warning: Please make sure the voltage selector is set to proper position that is match the actual power supply voltage.
Otherwise this DAC might be permanently damaged! Under such circumstance, the warranty is void.
14
、
Fused Power socket. There is a spare fuse in it that can be used when necessary
Connect to PC via USB:
Connect this DAC to a USB port of a PC via a USB cable, and the PC will automatically recognize it as a USB sound card. You may
need to set the output sound device in your playback software manually. Then select USB input from the DAC's front panel. Then
start enjoying the music.
To connect other inputs: Connect the devices via a proper cable, and select the corresponding inputs from the Input button on the front
panel of this DAC.
If you want to use the ASIO, it is needed to install the special ASIO drivering program for the D100 II.
Recommendation: Uses the USB to connect the D100 II, in order to get the best result, you can adjust the volume of PC to the
maximum and change the setting of the player to the format 24Bit/96KHz.
Summary of Contents for D100 II
