7
24.
Tighten the nuts in a cross pattern to seat the bearing seats to the housing.
25
.
Remove all 8 set up nuts and set them aside.
26.
Slide the caliper bracket and dust shield assemblies over the 4 bolts.
27.
The axles are double drilled for 5X4.5” & 5X5.5” bolt patterns. Use the pattern that matches
your application.
28.
Before installing the wheel studs, thoroughly clean the threads in the axle flange and on studs to remove oil
and grease. Apply a drop of high strength thread locking compound to the threads near the head
of the studs.
29.
Thread the (5) ½” studs into the flange of each axle and tighten to 90 ft. lbs.
