Page 4
For technical questions, please call 1-888-866-5797.
Item 64023
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Assemble on a flat, level, hard and smooth
surface capable of safely supporting
a fully loaded Workbench.
2. Attach Handle (4) to either side of Workbench
using four Handle Bolts (5) and Washers (6).
Handle
Bolt (5)
Handle
(4)
Flat
Washer
(5)
3. Attach two Swivel Casters (10) to the same end
as Handle using eight Caster Bolts (9) from the
inside of the cabinet down, secured with eight
Flat Washers (11) and eight Caster Nuts (12).
Swivel
Caster (10)
brake
lever
Caster
Bolt (9)
Caster Nut (12)
Flat Washer (11)
4. Attach two Fixed Casters (14) to the opposite end
from Handle using eight Caster Bolts (9) from the
inside of the cabinet down, secured with eight
Flat Washers (11) and eight Caster Nuts (12).
5. Lock the Swivel Casters by
depressing the brake levers.
6. Install the four tabs on each Shelf (13) into the
racks on the sides and center of the Cabinet
to install them at the desired heights.
tab
rack
7. Use the two hooks on the back of each Bin (15/17) to
install it in the holes on the inside of one of the doors.
hook
Bin (15/17)