Page 5
For technical questions, please call 1-888-866-5797.
Item 58832
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Assembly Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the following
pages, refer to
Parts List and Diagram
on page 10.
Note:
More than one person is needed for proper assembly.
1. Insert Connecting Nuts (17) into holes at ends of a
Cross Brace (5). Make sure that the slots on the
Nuts align horizontally. This will allow the Bolts to
be threaded into the Cross Brace in the next step.
connecting
connecting
Nuts (17)
Nuts (17)
Leg
Leg
(1,3)
(1,3)
cross Brace (5)
cross Brace (5)
2. Set the Cross Brace against a Leg (1) and use the
Hex Key (18) and 6 x 90 mm Connecting Bolts (16)
to fasten the Cross Brace and Leg together.
cross
cross
Brace (5)
Brace (5)
Leg
Leg
(1,3)
(1,3)
Hex
Hex
Key (18)
Key (18)
NOTE:
Make sure the groove in the
Cross Brace is facing IN.
3. Repeat Step 2 for the second Leg (3).
4. Once both Legs have been fastened to the
Cross Brace, slide the Bottom Shelf (6)
between the Legs so that the far edge fits
onto the groove on the Cross Brace.
cross
cross
Brace (5)
Brace (5)
Leg
Leg
(1,3)
(1,3)
Bottom
Bottom
Shelf (6)
Shelf (6)
5. Set the second Cross Brace against the
other edge of the Bottom Shelf.
Bottom
Bottom
Shelf (6)
Shelf (6)
cross
cross
Brace (5)
Brace (5)
6. Once the Cross Brace is in place and the
mounting holes on the Legs are aligned with
the Connecting Nuts in the Cross Brace, use
the Hex Key and Connecting Bolts to fasten
the second Cross Brace to both Legs.
7. With assistance, place the Table Top (2) face
down on a smooth, padded surface. This will
allow installation of the sliding drawers.
