Yukon Eagle SUPER JACK SJ125, Owner'S Manual, Page: 6 / 24

dANGERS - CAUtIoN - fIRE HAZARdS
(Burn wood logs or coal only)
•
This furnace must be installed according to the manu-
facturers instructions, NFPA and local codes.
• Ducts and plenums shall be constructed entirely of
sheet metal.
• Do not use flammable liquids to start a fire.
• Do not attempt to light a wood fire when gas or oil
vapors are present.
• Do not install on a burnable floor.
• In the event of an electrical power failure, be sure ash
door and fire door remain closed. Turn thermostat
down to shut off combustion fan.
• Do not install a power humidifier on warm air plenum.
• Store all ashes in a metal container with a tight fitting
lid. Allow ashes to cool before disposing of them.
• Be sure there is a sufficient supply of outside combus-
tion air to the area where the furnace is located.
• Keep smoke pipe connection as short as possible with
a minimum of 12-inch rise from the furnace to the
chimney opening. Smoke pipe should be 24 gauge
galvanized steel or heavier.
• This furnace has hot surfaces. Keep children away.
• Before servicing, allow furnace to cool. Shut off elec-
tricity.
• Familiarize yourself with this wood-burning furnace
before leaving it unattended.
• Follow a regular service and maintenance schedule of
furnace and chimney.
• IN THE EVENT OF A CHIMNEY FIRE, CALL FIRE
DEPARTMENT, AND THEN BE SURE ALL FURNACE
DOORS ARE CLOSED TIGHTLY.
Important: Make these adjustments when installing.