YUGE CLM920 NC2 LTE M.2, Hardware Usage Manual

Page: 37 / 40

CLM920_NC2_LTE M.2 Module Hardware Usage Guide
Shanghai Yuge Information Technology co., LTD - 37 -
Chapter 5. Interface electrical characteristics
5.1 Working storage temperature
Table 5-1 CLM920_NC2 M.2 4G module working storage temperature
parameter Min Max
Normal operating temperature -35
°
C 75
°
C
Extreme working temperature -40
°
C 85
°
C
storage temperature -45
°
C 90
°
C
5.2 Module IO level
CLM920_NC2 M.2 module IO level is as follows:
The corresponding UIM_PWR is 1.8V for the 1.8V USIM application. The UIM_PWR is
2.85V for the 3V USIM application.
Other digital IO levels are unified to 1.8V.
Table 5-2 Electrical Characteristics of CLM920_NC2 M.2 Module
parameter Parameter Description Min Max
VIH High level input voltage 0.65* VDD_EXT 0.3V
VIL Low level input voltage - 0.35*VDD_EXT
VOH High level output voltage VDD_EXT-0.45V VDD_EXT
VOL Low level output voltage 0 0.45V
5.3 power supply
CLM920_NC2 M.2 module input power requirements are as follows:
Table 5- 3 CLM920_NC2 M.2 module operating voltage
parameter Min Typical Max
Input voltage 3.3V 3.3V 4.2V
The power-on time of any interface of the module must not be earlier than the boot time of
the module. Otherwise, the module may be abnormal or damaged.