YUGE CEM600 EVDO Mini, User Manual

Page: 11 / 25

CEM600 EVDO Mini PCIE Module Hardware User Guide
Shang Hai YUGE Information Technology co., LTD Page 10 of 25
Chapter 4 Interface definition
The CEM600 module interface definition is shown in the following table:
Table 4-1 Interface definition
Pin Standard
Pin definition
Pin definition
I/O
properties
Description
1 WAKE# MIC_P Analog input Analog
audio input positive
terminal (optional feature)
2 3.3Vaux VCC_3V3 Power input 3.3V main power supply
3 COEX1 MIC_N Analog input Analog
audio input negative
terminal (optional function)
4 GND GND Ground
5 COEX2 EAR_P
Analog
output
Analog audio output positive
terminal (optional feature)
6 1.5V NC Unused
7 CLKREQ# EAR_N
Analog
output
Analog audio output negative
terminal (optional function)
8 UIM_PWR VREG_RUIM Power Output RUIM card power supply
9 GND GND Ground
10 UIM_DATA RUIM_DATA Two way RUIM card data
11 REFCLK- UART1_RXD Input
UART1 data reception (optional
function)
12 UIM_CLK RUIM_CLK Output RUIM card clock
13 UART1_TXD Output
UART1 data transmission (optional
function)
14 UIM_RESET RUIM_RESET Output RUIM card reset
15 GND GND Ground
16 UIM_Vpp NC Unused
17 Reserved UART1_RI_N Output Ringing indication signal
18 GND GND Ground
19 Reserved INT1_IN Input
Interrupt input, "low" is valid
(optional function)
20 W_DISABLE# W_DISABLE_N Input RF inhibit control, "low" effective
21 GND GND Ground
22 PERST# RESIN_N Input Reset control, "low" is valid
23 PERn0 UART1_CTS_N Input UART1 is ready to send
24 3.3Vaux VCC_3V3 Power input
3.3V auxiliary power supply
(optional function)
25 PERp0 UART1_RFR_N Output UART1 request to send
26 GND GND Ground
27 GND GND Ground