31
30
Indication:
cuff over inflated and release automatically
Could not obtain the pulse rate
Strong Electromagnetic interference
(Mobile phone and computer)
irregular pulse rate or blood pressure,
No
Take a break, and reposition the cuff and measure again
Correction:
Indication:
Correction:
Indication:
Correction:
Indication:
Correction:
Reposition the cuff and measure again
Relax and take a break, and then measure again.
Relax and take a break, and then measure again.
Troubleshooting
Problem Recommended method
No display
measurement
occurs
Blood pressure
readings are too
high or too low
Make sure that the batteries are installed in the proper direction.
(Polarity matches to the indication in the battery case.)
Check that the cuff is positioned properly, pgo over the measurement
procedure again.
Check if the arm is positioned properly
Posit
ion your arm on a table, so the cuff is at the same level as your
heart Remain seated during the entire measurement period
Refrain from hand and body movements during measurement
No Cuff Inflates
Bad machine, contact seller
Memory input
When a valid measurement is made, the result (systolic, diastolic, pulse rate,
date and
time) will be stored in the memory automatically as soon as the
device is turned off or when another measurement is initiated.
The device is capable to store 2×99 readings, and also compute the average
of the
latest 3 readings. When readings stored more than 90, the oldest
ones will be replaced.
Memory recall
By pressing Memory button, AVG will be shown in the middle left hand, which
means you entered into memory function. AVG means the average of all
recorded
readings. Now press the Memory button again, 01 will be shown in
the down left hand
corner, which is your latest reading in the memory,
when you press it again, 02 will be
shown which is the one before the latest
reading. When you press the button
repeatedly, the records will be displayed
sequentially
Er Indicators and Troubleshooting
Error indicators
rror indicators Possible sources of errors
E
Indication: Incomplete inflation
Check the cuff has been connected with
device firmly, if same
Er message indicated, request a repair
Correction:
