22
7.1 Initial Programming
If camera needs to connect to DVR or control panel (KEY PAD) you need to setup
protocol match to DVR’s or control panel‘s protocol. Please refer to
5.4.5 PROTOCOL.
※
This device is working in standard RS-485 communication format at the bps as
set.
7.2 Connection
Please refer to
3 Wire Connections
and the wire specification. The reference
connection diagram shows simple layout and this device is able to connect with as
many as 128 units and integrated application with other systems.
7.3 Controls
All function depends on the control device such as DVR or Key Pad you choose.
Function can be performed only if control device can support.
7.4
Protecting
To avoid lose control of camera when connecting to DVR or KEY
PAD; (They might mistakenly reset camera ID or protocol).
Camera’s protocol and ID Can only be set through infrared remote
control.
7-RS-485 Control mode
47
29.1 H-REVERS
Horizontal Reverse (Mirror) Function
Move cursor to H-REVERS, press ENTER key to enter
FREEZE ON/OFF menu.
Press UP or DOWN key to select ON/OFF.
MISC MENU
29.2 V-REVERS
Vertical Reverse (Up-side Down) Function
Move cursor to V-REVERS, press ENTER key to enter
FREEZE ON/OFF menu.
Press UP or DOWN key to select ON/OFF.
MISC MENU
29.3 POSI / NEGA
Positive or Negative Picture Function
Move cursor to POSI/NEGA, press ENTER key to enter
POSI/NEGA menu.
Press UP or DOWN key to select POSI/NEGA.
MISC MENU
MISC
H-REVERS
→
OFF
V-REVERS OFF
POSI/NEGA POSI
PRIORITY AGC
MASK A OFF
MASK B OFF
MISC
H-REVERS OFF
V-REVERS
→
OFF
POSI/NEGA POSI
PRIORITY AGC
MASK A OFF
MASK B OFF
MISC
H-REVERS OFF
V-REVERS OFF
POSI/NEGA
→
POSI
PRIORITY AGC
MASK A OFF
MASK B OFF
Summary of Contents for YSS-1523A-OIP
Page 2: ...2...
