Part 6
【
Function Operation and Description
】
1.Commnuication settings (Default PELCO-D/2400)
A, Baud rate protocol: The baud rate protocol of the speed dome is automatic
recognition.(PELCO-D,PELCO-P,2400bps,4800bps,9600bps)
Automatic recognition is divided into two states:
First: Automatic recognition on boot, it fixed after recognition, and restart the system to modify
the baud rateprotocol next time. (default) Second: Automatic recognition in every time. Call no.91
preset: Communication and baud rate protocol automatic recognition in every timeSet (ADD) no.92
preset: Communication and baud rate protocol automatic recognition only on boot (default). B . Address
code settings ( The factory default for
hard address
code ) The software address settings: by set
91+call N (N for 1-255), make sure the operation effect in controlling state. Clear soft address:
Call NO.92 preset( from soft address switch to hard address state)
2.Set the pan maximum speed ( as far as the factory value)
The users can define the pan speed as their requirement ( set NO.132 set NO. x preset
ending, X for 1-100,stand for the largest percentage of the speed dome ) [ 132]+[[N]+[PRESET]
3.Control the speed dome up ,down and left right rotation
Users can control the speed dome up and down movement by keyboard. Joystick
’
s movement can control
the speed dome
’
s action. when the joystick turn right, the speed dome also turn right. So the speed
dome
’
s movement agree with joystick
’
s movement.
4.Preset settings
[N] +[PRESET] ,N is preset point, 1-255 number can be optional (But the command Preset isn
’
t include).
5.Call preset( need set the corresponding preset point)
[N]+[CALL] ,N for preset point, 1-255 number can be optional, camera can move to preset point
after call, Zoom,
focus
and aperture
lens
will
automatically change to
preset
parameters , camera preset display on the monitor.
6 .Delete preset point
[N]+[CALL]+[CLEAR], input the preset point N what you want to delete ,press CALL key and press
CLEAR key.
7.Delete all preset point
[93] +[PRESET] ,set no.93 preset, clear the all preset [9]+[3]+[PRESET] .