background image

77

Last Modifi ed March 24, 2015 12:56 PM

 

Troubleshooting

77

EBCC Technical and Customer Service: +1 800-377-4532

High-power charger instructions.indd

High Power HP0180WL3 Battery Charger

Troubleshooting

Troubleshooting

INDICATOR LED...

SOLUTION

Does not illuminate

Make sure your wall socket is working. Check the 

charger power cord. If the charger still does not work, it 
may need to be repaired or replaced. Do not attempt to 
open the charger case yourself. Even if the charger is 
unplugged, you could still be injured by an electric shock.

Flashes red

Make sure the charger is fully plugged into the battery. 

Unplug the charger from the wall and from the battery. Wait 
about 10 seconds, then connect to the battery, followed 

by the wall outlet. If the indicator LED still fl ashes  red, 
there may be a problem with the battery or the charger. 

Flashes amber

The battery voltage is low, and the charger is attempt-

ing to raise it back to normal voltage with a low-current 
charge. Leave the charger connected to the battery. If 
the indicator still fl ashes amber after a few hours, the 
battery may be damaged beyond easy repair. 

Flashes amber, then 

immediately to solid green

No issue; the battery is fully charged.

For indoor use only.

Charge only Li-ion rechargeable batteries.

Charge in a well-ventilated area. Keep away from fl ames and sparks.

For more information, please see “Battery care & safety” on page 44.

Summary of Contents for SPUCY CURRY


















































































Reviews: