4
•
Press "MODE" to confirm your setting.
•
The hour display starts to flash. Now use "+" or "-" to set the correct hour.
•
Press "MODE" to confirm your setting.
•
The minute display starts to flash. Now use the "+" or "-" to set the correct minute.
•
Press "MODE" to confirm your setting and to end the setting procedure.
INFORMATION:
•
After approx. 20 seconds without a button being pressed, the clock switches atomically
from Setting mode to Normal clock mode.
SETTING THE WAKE-UP ALARMS
The weather station possesses two daily alarms (A1 and A2).
Proceed as follows to set the alarms:
•
Press "MODE" one time to select the A1 (Alarm 1) mode, and hold down the "MODE"
button for three seconds until the A1 hour is flashing.
•
Now use the "+" or "-" buttons to set the alarm hour.
•
Press the "MODE" button to set the A1 minute. Now use the "+" or "-" buttons to set
the alarm minutes.
•
Press "MODE" to confirm
•
To set Alarm 2 (A2), proceed as described above.
INFORMATION:
•
After approx. 20 seconds without a button being pressed, the clock switches atomically
from Setting mode to Normal clock mode
•
The alarm will sound for two minutes if you do not deactivate it by pressing any button
on the backside. In either case, the alarm will be repeated automatically after 24 hours.
•
Crescendo alarm: 2 minutes sound - increases in sound in 4 steps.
•
If you have set a time zone, the alarms will be activated based on this zone time
WAKE-UP ALARM ON/OFF
•
1st press "ALARM" to activate the alarm 1 with alarm symbol showing.
•
2
nd
press "ALARM" cancel the alarm 1, then activate the alarm 2 with alarm
symbol showing
•
3
rd
press "ALARM" to activate the alarm1 and alarm 2 with alarm symbol showing.
•
4
th
press "ALARM" cancel all the alarms
AUTOMATIC SNOOZE FUNCTION
•
To activate the automatic snooze function: While the alarm is sounding, press the
"SNOOZE/LIGHT" button to activate the snooze function. When the snooze function is
activated, the Alarm icon will blink.
•
The snooze cycle is five minutes
