YTL YTL-003-048, Instructions And Assembly, Page: 15 / 23

- 15 -
WARNING
Before operating or using the sweeper, review the instructions below and safety information.
Failure to follow these instructions may result in property damage and/or injury to the operator or
bystanders.
Attach the Sweeper to the Towing Vehicle
On a level surface, line up the towing vehicle with sweeper. Use the hitch pin and spacers to
adjust the height of the tow hitch, as shown in the diagram. Once adjusted, insert the R Pin Ø3 to
secure the hitch pin. For best results, the hopper should be level with the ground at a minimum
clearance of 5”. Secure the rope to the tow vehicle.
Adjust the Height of the Brushes
Use the height adjustment handle to set the height of the brushes. For optimal results, the brush height
should be ½” below the tips of the grass. For sweeping other materials, you may need to adjust the
height of the brushes.
Towing the Sweeper
Your sweeper is designed to work at speeds of 5mph and lower. You may damage the device or
experience sub-optimal results if exceeding 5mph. Your sweeper will work best on flat, smooth
surfaces. If operating on a slope, always tow the sweeper up or down the surface of the hill, not
sideways along the slope.
Dumping the Hopper
When dumping the hopper, use the rope to pull the basket forward. Dump the hopper regularly for best
performance.
CAUTION
Always keep body parts clear from and clothing detached from the sweeper and rope.
Keep sweeper away from fire or excessive heat will cause damage to the brushes and bag.
Operation Instructions