3
Weight 0.70kg(Net)
7. Software
Connect the meter correctly to computers or other applicable communication equipments, and connect
to the power supply. The original address is 0. Usage and setting of software please see JPG and
Modbus agreement document. During the writing operation, the SET button must be pressed on first.
8. Installation Instruction
*
Choose 35mm standard Din-Rail ( the length is confirmed by yourself ), fixed them in the
location which are waiting for installation
*
Put the meter into the upper Din-Rail, then push down the clip in the meter bottom, see
Fig. 1.After the bottom of the meter install into the Din-Rail successfully, release the clip to
make sure the meter have fully installed, see Fig.2 and Fig. 3
Fig 1