Ytec3D HP45, Assembly, Page: 4 / 17

HP45 controller V1.01 assembly guide -Ytec3d.com- Page 4
PCB assembly
Before you start
This controller has parts that are quite difficult to solder by hand and is not intended for beginners. It
is not really for anyone that has little to no experience with soldering SMD components. If you are
not completely sure about your soldering skills, this controller might be too difficult.
Tools required
To assemble the HP45 controller you will need the following tools:

Soldering iron with a fine SMD tip;

Fine (<0.5mm) resin core solder;

flush cutters;

Metal saw;

Files;

(optional, Dremel with a narrow cutting wheel);

(optional, 3D printer with 0.25mm nozzle for the pogo pin template);
All manuals and user guides at all-guides.com