YTEC GPS-1250 User Manual
Rev. 1.0 2007-03-16
GPS-1250_UM_10_ENG
6
Before you start using GPS-1250, you must charge the battery and pair GPS-1250 with a compatible phone.
z
Charge the battery
GPS-1250 has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery
from the device as you may damage it.
1.
Connect the charging cable to the power jet of GPS-1250.
2.
Connect the charging cable to a USB plug. The red light twinkles during charging.
3.
When the battery is fully charged, the red light will turn off. Disconnect the charging cable from the
USB plug and GPS-1250.
When the battery is running out, red light will turn on.
z
Switch on or off
To switch GPS-1250 on, pull the power switch to the on label. White light starts to twinkle.
To switch GPS-1250 off, pull the power switch to the off label. All lights turn off.
z
Pairing with a compatible phone
1.
Switch on your phone and GPS-1250.
2.
Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth device. See the
user guide for your phone for instructions.
3.
Select GPS-1250 from the list of found devices.
4.
Enter the pin code 0000 to pair and connect GPS-1250 to your phone. In some phones you may need
to make the connection separately after paring. See the user guide of your phone for details. You only
need to pair the headset with your phone once.
--You can set your phone to connect with GPS-1250 automatically when GPS-1250 is switched on. See
the user guide of your phone for details.
--Paring procedures must be done within 60 seconds after switching on.
z
Disconnect GPS-1250 from the phone
To disconnect GPS-1250 from your phone, do one of the following:
1.
Switch off the headset
2.
Disconnect GPS-1250 in Bluetooth menu of your phone.
3.
Move GPS-1250 more than 10 meters away from the phone.
You do not need to delete the pairing with GPS-1250 to disconnect it.