6
P6
：
load indication. This symbol indicates that controller is in output state, otherwise not in the output state. The flickering of this symbol
indicates overload or the damage of the load.
P7
：
A
stands for the unit of current;
H
stands for hour.
P8
：
V
stands for the unit of voltage.
2
Description of Button Function:
:
Interface loop switch button, use the button to cycle between pages in each switch cycle sequence
shown in (figure 1). Moreover, this button can perform the function of “add” in the parameter setting
state.
:
This button can open or shut off load in the main interface. It can perform the function of “minus” in
the parameter setting state.
overall unit state floating charge voltage
recovery after undervoltage
options of battery types
load mode
undervoltage protection
图
1