YSI MultiLab 4010-1W, Operating Manual

Page: 78 / 114

Data storage MultiLab 4010-1W
78
ba76141e07 08/2018
10 Data storage
You can transmit measured values (datasets) to the data storage:

Manual data storage (see section 10.1 M
ANUAL DATA STORAGE
, page 78)

Automatic data storage at intervals (see section 10.2 A
UTOMATIC DATA STOR
-
AGE AT INTERVALS
, page 79)
Each data storing process transmits the current dataset to the USB interface.
10.1 Manual data storage
You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
When the storage is
full
When all storage locations are occupied, it is not possible to continue storing.
Then you can e.g. transmit the stored data to a PC (see section 10.3.1 M
ANAG
-
ING THE MEASUREMENT DATA STORAGE
, page 81) and subsequently erase the
data storage (see section 10.3.2 E
RASING THE MEASUREMENT DATA STORAGE
,
page 82).
1. Press the
<STO>
key shortly.
The menu for manual data storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<

><

>
and
<ENTER>
.
The dataset is stored. The meter switches to the measured value dis-
play.
03.04.2013 07:43:33
pH 7.000 24.8 °C AR +++
ID number: 1
continue
Manual data storage 4 von 500
03.04.2013
08:00
Back