YSI 5200A
205
YSI 5200A
204
AquaManager
-
Database Auto-Compaction must be enabled in order to access the Backup
enable box.
Autopoller
Autopoller is designed to poll node(s) at an interval specified by the user. When the
node(s) is polled, new log records and the configuration are saved to the AquaMan-
ager database. Autopoll must be running for the AquaManager email and mapping
functions to operate.
Launch Autopoll at the Explorer Window>Tools>Launch Autopoller.
An Autopoller Window opens when Autopoller is launched.
Mapping
Create a network map to display current conditions* for 5200A and 5400 nodes at
the AquaManager PC. Map icons are configured to represent nodes, node systems,
and relays. Map icon images change based on system condition(s). For example,
one icon is displayed when pH is in acceptable operating range, a second icon is
displayed when pH system is in control range (when enabled), and a third icon is
displayed when pH system is in alarm range. This provides a quick visual of system
conditions at the PC.
*Near real-time - Map is updated several times a minute as AquaManager constantly
communicates with nodes during Autopolling.
Node mapping is available for direct and TCP/IP node communication types.
The following figure is an example of an AquaManager map.
AquaManager Alarm Emails
The PC running AquaManager can be configured to send an alarm email when data
received from the node is in alarm range. The alarm range or condition is based on
the node configuration. The node configuration is stored in the network database and
is verified and updated at each Autopoll SMS communication interval. Autopoller
must be running for AquaManager to generate alarm emails. Run Autopoller 24/7
to ensure that alarm emails are sent.
AquaManager