http://www.ysvacuumsealer.com
9
appliance. If it’s not, please check the circuit breakers or fuses in
your home.
Make sure the bag is positioned correctly down in the sealing
foam chamber.
Wait 25 minutes to allow appliance to cool off, and then try using
again.
Air is not vacuumed from the bag:
Check that there are no gaps, folds, wrinkles or holes in the
pre-sealed bags.
Check for loose, worn or cracked Upper and Lower sealing
gaskets.
Foods with high liquid contents may prevent the bag from sealing
properly. Cut bag open and wipe top inside of bag and reseal.
Check to see if bag is properly inserted into the sealing foam
chamber.
Make sure you’ve placed the bag in the proper place. When
making a bag from a roll, make sure end of cut piece is on the
sealing bar.
Bag melts:
The sealing strip may have been too hot during the sealing
process. Allow the unit to cool for 20 seconds between uses. If the
bag continues to melt, allow unit to cool with the lid in the upright
position for 25 minutes before using.
Air has seeped back into the vacuumed bag:
