30
Command:
#09#
Response:
#00# Set as Master
#01# Arm YOYOCam
#02# Disarm YOYOCam
#03#Password#Quantity# Request images
#04#OldPassword#NewPassword# Change 4-digit password
#05#SensorDescription# Load sensor
#06#number# Add USER phone number
#07# Report Status
#08#Password# Reset to default settings
#22#0# Disable motion detection
#22#1# Enable motion detection
Mobile Network settings
YOYOCam uses MMS (Multimedia Messaging Service) to send images and Email messages.
YOYOCam automatically configures the necessary MMS settings for the major Scandinavian
networks. If your SIM is issued by some ‘Mobile Virtual Network Operators’ (MVNO) then you may
need to enter the correct settings.
Checking MMS Configuration
To check presently-configured MMS parameters:
Command:
#55#
Example:
MMSC: http://mmsc.t-mobile.co.uk:8002
IP: 149.254.201.135
WAP Port: 8080
HTTP Port: 8002
APN: general.t-mobile.uk
APN User: user
APN Password: tm
To check if MMS is configured and working
Command:
#03#
Response:
Request Received. YOYOCam images are being sent by MMS
YOYOCam’s status indicator flashes
while the MMS is sent.
Images are received (MMS is configured)
The network is busy. No image has been sent
. (MMS not configured or
wrongly configured)
